SOLITAIRE MACHINE TOOLS LIMITED

SOLITAIRE MACHINE TOOLS LIMITED

REMANUFACTURED CINCINNATI MODEL 340-20 TWIN GRIP CNC CENTERLESS GRINDER

	DETAILS OF REMANUFACTURING CENTERLESS GRINDER CNC
Ø	Completely dismantle machine.
Ø	Disassemble all sub assemblies and other units.
Ø	Clean all parts of machine. Inspect all parts of the machine.
	Clean and remove paint from all parts of the machine.
Ø	Paint all parts of machine with Acrylic Polyurethane paint.
Ø	Regrind or rescrape regulating wheel housing, upper and lower slides, swivel and
	bed casting- Rescrape or replace and adjust gibs.
Ø	Regrind or rescrape regulating wheel dresser slides -check and rebuild/replace
	hydraulics. Replace lead screw if necessary.
Ø	Install new CNC Grinding Wheel dresser slides with ball screws etc.
Ø	Recoat regulating wheel spindle, grind to original diameter and rescrape
	and replace or rescrape special alloy bronze bearings.
Ø	Recoat grinding wheel spindle, grind to original diameter and replace or
	rework bearings, as required and scrape to suit spindle.
Ø	Rebuild transmission and replace worn pulleys, belts, etc.
Ø	New hydraulic unit and pump. Replace hoses, fittings as necessary.
Ø	Rebuild and replace regulating wheel infeed lead screw / ball screw.
Ø	New Auto lubrication system. Replace parts.
Ø	New electrical panel with CNC controls. Overhaul electric motors as required.
Ø	Assemble machine and test.