CNC PRODUCTS

SOLITAIRE FOUR AXIS CNC GRINDER CONTROLS

Þ	Solitaire has developed one of the most user friendly controls dedicated
	to Centerless Grinding application. The controls are operated by
	Siemens 802D CNC controller with Siemens hardware.
Þ	The software is provided for Thrufeed and Infeed to allow flexibility of the
	operations. It is user friendly operator Interface Monitor with easy to work
	with software. Simple G Code driven software.
Þ	The software is easily Programmable to generate steps, tapers, radii
	and crown on grinding wheel and can be customized to suit application.
Þ	The software can be integrated with various CNC options and customized
	to suit different applications. A stand alone enclosure is provided for the
	controls which can be installed on new or used grinders.
Þ	In case of used grinders, Solitaire can also rebuild your infeed and
	dresser slides prior to installation of attachment to ensure optimum
	performance.
Þ	Siemens AC Digital Brushless Servo Motor is assembled with Alpha
	Germany Precision Gear Box of 10:1 ratio however other gear ratios
	are available for different applications.
Þ	The axes are operated with the help of Precision Ground Ball Screws
	with Preloaded Zero Backlash Nut Assembly.
Þ	The infeed program allows load, rough, semi finish and finish diameter
	set up with individual feed rate for each step of the way in each grinding
	cycle. The spark out time, load time and dwell time after rough grinding
	can be programmed and can be set up for single or auto cycle.

INFEED SLIDE AXIS (X AXIS)

Þ	This axis controls the infeed slide movement for grinding cycle.
Þ	The operator can set feed rate for grinding.
Þ	Three different feed rate and diameters are possible in each grinding
	cycle, namely rough grind ,semi finish grind, and finish grind.
Þ	The dwell time for loading and spark out can also be programmed.
Þ	The infeed side can be compensated for size adjustment in the
	increment of 0.001 mm or one micron. The compensation can be
	done manually or automatically as provided for the grinder.
	TWO AXIS CNC GRINDING WHEEL DRESSER ( Y & Z AXIS )
Þ	The grinder will be equipped with 2 axis CNC grinding wheel dresser.
Þ	Precision frictionless roller slides will be installed for
	traverse axis (Y axis) and honed housing and precision ground
	quill assembly for accurate advance of diamond (Z axis).
Þ	There axis will be integrated with servo infeed assembly and other
	CNC options. dress compensation provided in case of integration
	with servo infeed attachment. The compensation can be done
	manually or automatically as provided for the grinder.
	THREE AXIS CNC GRINDING WHEEL DRESSER ( Y & Z AXIS )
Þ	The regulating wheel drive will be integrated with servo infeed
	attachment through the controller.
Þ	Different speeds can be programmed for rough grind, semi finish
	grind and finish grind in the same grinding cycle.
Þ	By varying speed while grinding improves the surface finish and roundness
	of the component.
Þ	The speeds can be changed in increment of 1 rpm.
Þ	Some time the component may be slightly bent and in such case a low
	pre grind off the bent condition without loading up the wheel or getting
	burn marks on the component.